The following listen address fields are displayed in the Device Management Configuration page.
- Protocol:
Select from the drop-down menu http or https.
o Select https, if you have already set up an SSL certificate.
o Select http if you have not set up an SSL certificate.
- Host:
Select from the drop-down menu FQDN/IP Address, Match All or All Unmatched.
- Port:
Enter the TCP Port.
o The TCP port that the PowerSuite Agent Provisioning Service will listen on for this listen address. The default TCP port for the selected protocol will be used if no entry is entered into the field.
§ The default fields are 80 for http and 443 for https.
- Path:
Enter the path for the listen address.
o The path must start and end with the forward slash ("/") character, or be a single forward slash character.
§ Example: /Temporary_Listen_Addresses/DeviceMgmt/